Hot Sale 🛒 Footwear Forclaz Trek 100, Flexible Leather Hiking 🥾 Boots, 👩 Women’s 🧨

Are you looking for waterproof leather boots to walk on clearly marked paths and moderate slopes? This backpacking-specific design will bring you comfort, support, and protection

-> EASY TRAIL AND MODERATE SLOPE

SOLE WITH GRIP

The grip of our soles is certified
To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 310 miles

HOW WATERPROOF ARE THESE BOOTS?

This boot has been validated by a waterproofing test at 30,000 repeatable flexes, i.e. 9 miles – 6 hours of walking, in water up to the mid-upper, which today guarantees a very good level of waterproofing for your boots.

--> Our assessment indicates a LEVEL OF 3/5 giving 6 hours of waterproofing when hiking in the rain.

The details of tests carried out to assess the waterproofing of our boots is below, in the features section.

Making waterproofing last longer

A boot’s waterproofing is often undermined by water getting in from the top of the boot. To keep your feet dry for longer, it is therefore advisable to use a waterproof gaiter or mini-gaiter that will prevent not only water from getting inside through the top, but also pebbles, sand, etc. It is advisable to use a waterproof spray several times a year. This restores the original water-repellent properties and prevents staining.

CARE ADVICE

1 / Use a brush and/or sponge to clean the boot and remove any dirt or mud.
2/ Then leave to air-dry, away from any heat source.
3/ Finish by using a re-waterproofing spray to keep optimal water-repellency of the upper and extend the life of the boot.
Link below for the applicator, also available online

https://www.decathlon.fr/p/applicateur-re-activateur-de-deperlance-pour-chaussures/_/R-p-307629?mc=8551

Which size should I select?

Which size should I select? For hiking, do not hesitate to buy 1 size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the boot. Tip: Keep your toenails short and, before making your descent, check that your lacing prevents your foot from sliding toward the front of the boot.

5 levels of waterproofing

During the waterproofing test, we test 5 levels of waterproofing:
2,000 flexes (approximately 2.5 miles, 30 minutes of walking)
10,000 flexes (approximately 6 miles, 3 hours of walking)
30,000 flexes (approximately 9 miles, 6 hours of walking)
50,000 flexes (approximately 12.5 miles, 8 hours of walking)
100,000 flexes (approximately >12.5 miles, 24 hours of walking)

Waterproofing test

Our boots are laboratory-tested according to 2 successive tests
Test 1 / We test the efficiency of the membrane only when it is put under pressure and placed in water, checking the absence of water at the surface, like when you test a “punctured inner tube.
Test 2 / The assembled boots are placed on mechanical arms that simulate walking and are half immersed in water. They complete thousands of flexes to check that the inside of the boot remains dry and it is therefore waterproof.

BUYING TIPS / HOW DO YOU TRY YOUR BOOTS ON?

How to choose your boots:
1. Try on both boots, standing up and wearing the socks you use for hiking. 2. Tighten the laces correctly
3. Check the following 2 areas of comfort: the base of the heel and the front part of the foot going down. 4. Get up to walk with the boots on.
5. Try on several sizes and models.
6. Wear your boots for increasingly long periods to wear them in

CO-DESIGN

These boots were co-designed with passionate backpackers, each bringing their own special skills. For example, one of our co-designers is a chiropodist who helps us meet the physiological needs of people’s feet and make sure they are comfortable and safe during treks.

MANUFACTURING

TREK 100 leather boots are manufactured in the European Union, in Romania, in a factory that specializes in making backpacking boots.
This plant uses only water-based glues with no chemical solvents.
Most materials are of European origin.

MANUFACTURER: https://grisport.it/company/?lang=en

KNOWLEDGE OF THE SPORTING BODY

Decathlon SportsLab contributes to the innovation and design of Decathlon products, by increasing knowledge of the human body in its environment.
Our researchers explore the working and needs of sportspeople’s bodies as they practice their sport.
Our experts contribute their knowledge of sports sciences, thermal comfort, morphology, and perception to the safety and well being of our sports people.

SPORTSLAB: https://www.youtube.com/watch?v=XpfMJNQSthY

Lab tests

Laboratory tests were conducted to test the following elements: – tearing of the eyelets and straps
– bonding of the sole
– toxicology
– UV resistance
– abrasion of the sole and components of the upper
– accelerated aging.

SATISFACTION OR YOUR MONEY BACK

If you do not need a new product or if it doesn’t meet your sporting needs, you have 365 days to exchange it or seek a refund in all Decathlon stores.

Composition

Outer sole of : 60.0% Rubber – Synthetic, Outer sole of : 40.0% Polyurethane
Upper of : 60.0% Split bovine leather, Upper of : 40.0% Polyester cationic
Lining and sock of : 100.0% Polyester cationic

Grip : 100% approved rubber sole that improves grip and traction

Durability : Leather upper and stoneguard on front foot for greater strength and durability

Waterproof : Waterproof membrane tested on a 9-mile walk in water up to the mid-upper

Fit : High upper, equipped with 2 high hooks and 1 secure blocker hook

Stride : Flexible sole to improve walking, ideal for easy trail routes

Cushioning : Sole heel made with a long-lasting cushioning material (PU)